Adey MagnaScale2 Scale Reducer 15mm SR1-03-05230 - SR1-03-05230

ADEY MagnaScale2 Compression Scale Reducer - 15mm

The harder the water, the more minerals it contains and the more likely limescale is to build up. Designed for properties where water hardness is above 200ppm, MagnaScale2 protects individual appliances from damage, so that hard water isn’t a problem.

Homeowner benefits
Maintenance free
Immediate limescale protection for individual appliances
No running costs – no mains power supply required
Approved by WRAS (Water Regulations Approval Scheme)
10-year warranty

Connection: 15mm compression
Material: Low lead brass body & end caps, with internal magnet
Maximum working temperature: 85°C
Minimum working temperature: 3°C
Maximum working pressure: 10 bar at 20°C 6 bar at 65°C
Compression body length: 147mm
Diameter: 39mm
MagnaScale2 15mm Compression ΔP at 25.0 l/min = 123 mbar
Pressure drop: 25L/min = 123mbar

MagnaScale2 can be installed on horizontal and vertical pipework. To get the best protection from limescale, it should be installed as close to the appliance as possible, without exceeding maximum operating temperature. Full instructions can be downloaded here.

Always follow the electrical and safety standards when installing a MagnaScale.

It is recommended that the MagnaScale is installed by a qualified heating engineer.

Care should be taken when handling. During transportation, secure the unit properly to prevent any damage. If this product is not being installed immediately, ensure it is stored in a dry, frost-free location in its original packaging.

These product assemblies contain valuable materials which can be recovered or recycled. At the end of the product’s useful life, please leave it at an appropriate local civic waste collection point.

Use appropriate tool to tighten

£39.72
£33.10 (ex VAT)