Gledhill Stainless Lite Plus Indirect 120 Litre Cylinder PLUIN120 - PLUIN120

Gledhill Stainless Lite Plus Indirect 120 Litre Cylinder PLUIN120

An unvented cylinder for use with a conventional boiler and electric

Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils.

All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.

(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

• Designed for use with gas or oil boilers, either sealed system or open vented

• High efficiency corrugated coil maximises heat transfer to the cylinder of water

• Corrugated coil provides faster reheat times compared to plain coil

• 3kW incoloy immersion heater for emergency back-up

• 90° elbow, flexihose and drain valve supplied as standard

• Standard and slimline models available

£667.94
£556.62 (ex VAT)
Brand Gledhill
Category Indirect Unvented Cylinders
Part number PLUIN120
Cylinder Capacity 119 Litres
Diameter (mm) 550mm
Height (mm) 931mm
Weight (Kg) 23kg Empty
Weight (Kg) 142kg Full